Publications

The following publications are registered for the group faculty in DTU Orbit

rss feed

2022
  PDF

Joint modelling in advanced thin-walled beam models

Hansen, Anders B. ; Jönsson, Jeppe ; Vieira, Ricardo F.
in: Thin-Walled Structures, vol: 171

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2022     |    DOI: https://doi.org/10.1016/j.tws.2021.108798

2021
 

Steel frames analyzed by use of advanced displacement mode‐based beam and joint elements

Hansen, Anders Bau ; Jönsson, Jeppe
in: Ce/papers, vol: 4, issue: 2-4, pages: 401-406

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2021     |    DOI: https://doi.org/10.1002/cepa.1309

2020
 

Axial-moment interaction for 2D welded steel joints using FEA: An initial investigation

Bayo, Eduardo ; Gracia, Javier ; Jönsson, Jeppe
in: Journal of Constructional Steel Research, vol: 168

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2020     |    DOI: https://doi.org/10.1016/j.jcsr.2020.106001

2019
  PDF

A thin-walled beam element based on semi-analytical solution modes

Hansen, Anders Bau ; Jönsson, Jeppe
in: Thin-Walled Structures, vol: 144

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2019     |    DOI: https://doi.org/10.1016/j.tws.2019.106344

  PDF

Displacement modes of a thin-walled beam model with deformable cross sections

Hansen, Anders Bau ; Jönsson, Jeppe
in: Thin-Walled Structures, vol: 141, pages: 576-592

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2019     |    DOI: https://doi.org/10.1016/j.tws.2019.01.052

  PDF

Experimental Study of Residual Stresses in Hybrid Laser Arc and Submerged Arc-Welded 10-mm-Thick Low-Carbon Steel Plates

Andreassen, Michael Joachim ; Yu, Zhenzhen ; Bunn, Jeffrey R. ; Nielsen, Jens Henrik
in: Materials Performance and Characterization, vol: 8, issue: 4

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2019     |    DOI: https://doi.org/10.1520/MPC20180134

 

Influence of Plate Geometry on the Welding Residual Stresses from Submerged Arc Welding in Offshore Steel Structures

Andreassen, Michael Joachim
Presented at:
72nd IIW Annual Assembly and International Conference

Type: Paper (Peer reviewed)

Status: Published     |    Year: 2019

  PDF

Investigation of European flexural and lateral torsional buckling interaction

Jönsson, Jeppe ; Müller, Magnus Sundt ; Gamst, Christian ; Vales, Jan ; Kala, Zdenek
in: Journal of Constructional Steel Research, vol: 156, pages: 105-121

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2019     |    DOI: https://doi.org/10.1016/j.jcsr.2019.01.026

  PDF

Mode‐based Beam and Connection Analysis of Frames

Hansen, Anders Bau ; Jönsson, Jeppe
in: Ce/papers, vol: 3, issue: 3-4, pages: 355-360
Presented at:
The 14th Nordic Steel Construction Conference

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2019     |    DOI: https://doi.org/10.1002/cepa.1066

  PDF

Modelling of steel frames using advanced beam and joint elements with interfaces governed by beam modes

Hansen, Anders Bau ; Jönsson, Jeppe
in: Thin-Walled Structures, vol: 145

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2019     |    DOI: https://doi.org/10.1016/j.tws.2019.106430